Moorea ribbed sheet

Ribbed panels

Product Information:

Image Project information - 1
Image Project information - 2
Image Project information - 3
Image Project information - 4
Image Project information - 5

Fastener:

  • The specifications of the fasteners must comply with the recommendations of the SNFA professional regulations. The fasteners are placed at the bottom of the rib every 3 ribs maximum.
  • On wooden beams: Anchoring length 40 mm Pointed end self-tapping screw Ø ￸ 6.3x50 mm minimum
  • On metal rails: Minimum thickness 15/10th Self-tapping screw Ø ￸ 6.3x35 mm minimum depending on the thickness of the drilling

Installation:

On transverse wooden or metal rails the spacing of which varies according to the specifications of the product and the climatic loads. Support width on wooden rails: 60 mm, metal: 40 mm.

MOUNTING ACCESSORIES: see assembly sheet

SPAN TABLE: upon request according to the pitches

TRAPEZOIDAL RIB

  • Effective width: variable according to the number of pitches
  • Maximum length: 3000 mm
  • Minimum pitch: 60 mm
  • Wave height: 25 mm

Key features:

  • Fire rating M0
  • 100% recyclable
  • Longevity
  • Lightweight (depending on metals)
  • Resistance to aggressive environments
  • Flexible finishes
  • All metals possible
  • Adaptation of geometry

Profile:

  • Effective width: variable according to the number of pitches
  • Maximum length: 3000 mm
  • Minimum pitch: 60 mm
  • Wave height: 23 mm

Use:

  • The range of ribbed panels is a selection of decorative cladding made by micro-folding, usable for cladding façades, roof cladding or interior cladding.
  • This system is intended to be implemented on façades or designer cladding.

Perforations:

300+ possible perforations:

  • Round
  • Square
  • Elongated
  • Any surface
  • By zone
  • Ribbed
  • Ultramarine Sensation

Anodising:

  • Class 15 or 20
  • Post anodised after parts manufacturing

Metal:

  • Aluminium
  • Galvanized steel
  • Stainless steel
  • Copper

Lacquering:

  • All RAL colours
  • Electrostatic powder coating finish
Technical datasheet: