Fidji ribbed Sheet

Ribbed panels

Product Information:

Image Project information - 1
Image Project information - 2
Image Project information - 3
Image Project information - 4
Image Project information - 5
Image Project information - 6


  • The specifications of the fasteners must comply with recommendations of the SNFA professional regulations. The fasteners are placed at the bottom of the rib every 3 ribs maximum.
  • On wooden beams: Anchoring length 40 mm Pointed end self-tapping screw ￸ Ø 6.3x50 mm minimum
  • On metal rails: Minimum thickness 15/10th Self-tapping screw Ø￸ 6.3x35 mm minimum depending on the thickness of the drilling


On transverse wooden or metal rails the spacing of which varies according to the specifications of the product and the climatic loads. Support width on wooden rails: 60 mm, metal: 40 mm.

MOUNTING ACCESSORIES: see assembly sheet

SPAN TABLE: upon request according to the pitches


  • Effective width: variable according to the number of pitches
  • Maximum length: 6000 mm
  • Minimum pitch: 55 mm
  • Wave height: 34 mm

Key features:

  • Fire rating M0
  • 100% recyclable
  • Longevity
  • Lightweight (depending on metals)
  • Resistance to aggressive environments
  • Flexible finishes
  • All metals possible
  • Adaptation of geometry


  • Effective width: variable according to the number of pitches
  • Maximum length: 6000 mm
  • Minimum pitch: 62.5 mm
  • Height of wave: 13.3 mm


  • The range of ribbed panels is a selection of decorative cladding produced by micro-folding, usable for cladding façades, roof cladding or interior cladding.
  • This system is intended to be implemented on façades or designer cladding.


300+ possible perforations:

  • Round
  • Square
  • Elongated
  • Any surface
  • By zone
  • Ribbed
  • Ultramarine Sensation


  • Clear Anodising
  • Gold
  • Bronze< /li>
  • Colouring
  • Class 15 or 20
  • Post anodised after parts are manufactured


  • Aluminium
  • Galvanized Steel
  • Stainless Steel
  • Copper


  • All RAL colours
  • Polyester and PVDF quality
  • Electrostatic powder coating finish
Technical datasheet: