Barbades ribbed sheet

Ribbed panels

Product Information:

Image Project information - 1
Image Project information - 2


  • The specifications of the fasteners must comply with the recommendations of the SNFA professional regulations. The fasteners are placed at the bottom of the rib every 3 ribs maximum.
  • On wooden beams: Anchoring length 40 mm Pointed end self-tapping screw ￸ Ø 6.3x50 mm minimum
  • On metal rails: Minimum thickness 15/10ths Self-tapping screw ￸ Ø 6.3x35 mm minimum depending on the thickness of the drilling


On transverse wooden or metal rails the spacing of which varies according to the specifications of the product and climatic loads. Support width on wooden rails: 60 mm, metal: 40 mm.

MOUNTING ACCESSORIES: see assembly sheet

SPAN TABLE: upon request according to the pitches


  • Effective width: According to the number of pitches
  • Maximum length: 3000 mm
  • Useful pitch: 85 mm
  • Wave height: 34.5 mm

Key features:

  • M0 fire rating
  • 100% recyclable
  • Longevity
  • Lightweight (depending on metals)
  • Resistance to aggressive environments
  • Versatile finishes
  • All metals possible
  • Adaptation of geometry


  • Effective width: variable according to the number of pitches
  • Maximum length: 3000 mm
  • Minimum pitch: 85 mm
  • Height of wave: 34.5 mm


  • The range of ribbed panels is a selection of decorative cladding produced by micro-folding, usable for cladding façades, roof cladding or interior cladding.
  • This system is intended to be implemented on façades or designer cladding.


More than 300 possible perforations:

  • Round
  • Square
  • Elongated
  • Any surface
  • By zone
  • Ribbed
  • Ultramarine
  • Sensation


  • Clear anodising
  • Gold
  • Bronze
  • Colouring
  • Class 15 or 20
  • Post anodised after parts are manufactured


  • Aluminium
  • Galvanized Steel
  • Stainless Steel
  • Copper


  • All RAL colours
  • Polyester and PVDF quality
  • Pre-coating on the roll
  • Electrostatic powder coating finish
Technical datasheet: