Ribbed sheet Variation 5

Ribbing

Product Information:

Image Project Info - 1
Image Project Info - 2

Fixings:

  • The characteristics of the fasteners must comply with the recommendations of the SNFA professional rules. The fixings are placed at the bottom of the rib every 3 ribs maximum.
  • On wooden beams: Anchoring length 40 mm Pointed end self-tapping screw ø 6.3×50 mm minimum
  • On metal rails: Minimum thickness 15/10th Self-tapping screw ø 6.3×35 mm minimum depending on the thickness of the drilling

Pose:

On transverse rails in wood or metal whose spacing varies according to the characteristics of the product and the climatic overloads. Support width on wooden rails: 60 mm, metal: 40 mm.

MOUNTING ACCESSORIES: see assembly sheet

SPAN TABLE : on request according to the steps

HALF ROUND RIB

  • Useful width: variable according to the number of steps< /li>
  • Maximum length: 3000 mm
  • Minimum pitch: 9 to 20 mm
  • Wave height: 5 to 10 mm

Key features:

  • Useful width: variable according to the number of pitches
  • Maximum length: 6000 mm
  • Minimum pitch: 510 mm
  • Wave height: 56 mm

Profil:

  • Useful width: variable according to the number of steps
  • Maximum length: 3000 mm
  • Minimum pitch: 9 to 20 mm
  • Wave height: 5 to 10 mm

Use:

  • The range of ribbed panels is a range of decorative facings produced by micro-folding, which can be used for covering e facades, over-roofs or interior cladding.
  • This system is intended to be implemented on facades or designer cladding.

Perforations:

More than 300 possible perforations:

  • Round
  • Square
  • Elongated
  • All surfaces
  • On the beach
  • Ribbed
  • Outremer Sensation

Anodizing:

  • Clear Anodizing
  • Gold
  • Bronze
  • Coloring
  • Class 15 or 20
  • Post anodized after parts manufacturing

Metal:

  • Aluminium
  • Galvanized steel
  • Stainless steel
  • Copper

Lacquering:

  • All RAL colors
  • Polyester and PVDF quality
  • Pre-lacquering in coils
  • Post-lacquering by electrostatic powdering
Data sheet: