Ribbed sheet Tahiti

Ribbing

Product Information:

Image Project Info - 1

Fixings:

  • The characteristics of the fasteners must comply with the recommendations SNFA professional rules. The fixings are placed at the bottom of the rib every 3 ribs maximum.
  • On wooden beams: Anchoring length 40 mm Pointed end self-tapping screw ø 6.3×50 mm minimum
  • On metal rails: Minimum thickness 15/10th Self-tapping screw ø 6.3×35 mm minimum depending on the thickness of the drilling

Pose:

On transverse rails in wood or metal whose spacing varies according to the characteristics of the product and the climatic overloads. Support width on wooden rails: 60 mm, metal: 40 mm.

MOUNTING ACCESSORIES: see assembly sheet

SPAN TABLE : on request according to the steps

HALF-ROUND RIB

  • Useful width: variable according to the number of steps< /li>
  • Maximum length: 6000 mm
  • Minimum pitch: 80 mm
  • Wave height: 18 mm

Key features:

  • Useful width: variable according to the number of pitches
  • Maximum length: 6000 mm
  • Minimum pitch: 510 mm
  • Height of wave: 56 mm

Profil:

  • Useful width: variable according to the number of steps
  • Maximum length: 6000 mm
  • Minimum pitch: 80 mm
  • Wave height: 18 mm

Use:

  • The range of ribbed panels is a range of decorative facings produced by micro-folding, usable for facade cladding, on-roof es or interior cladding.
  • This system is intended to be implemented on facades or designer cladding.

Perforations:

More than 300 possible perforations:

  • Round
  • Square
  • Elongated
  • Any surface
  • On the beach
  • Ribbed
  • Outremer Sensation

Anodizing:

  • Clear anodizing
  • Gold
  • Bronze
  • Coloring
  • Class 15 or 20
  • Post anodized after fabrication of parts

Metal:

  • Aluminum
  • Galvanized Steel
  • Stainless steel
  • Copper

Lacquering:

  • All RAL colors
  • Polyester quality and PVDF
  • Pre-lacquering in coil
  • Post-lacquering by electrostatic powdering
Data sheet: