Ribbed sheet Mahé

Ribbing

Product Information:

Image Project Info - 1
Image Project Info - 2
Image Project Info - 3
Image Project Info - 4

Fixings:

  • The characteristics of the bindings must comply with the recommendations of the SNFA professional rules. The fixings are placed at the bottom of the rib every 3 ribs maximum.
  • On wooden beams: Anchoring length 40 mm Pointed end self-tapping screw ø 6.3×50 mm minimum
  • On metal rails: Minimum thickness 15/10ths Self-tapping screw ø 6.3×35 mm minimum depending on the thickness of the drilling

Pose:

On wooden or metal transverse beams whose spacing varies according to the characteristics of the product and climatic overloads. Support width on wooden rails: 60 mm, metal: 40 mm.

MOUNTING ACCESSORIES: see assembly sheet

SPAN TABLE : on request according to the steps

TRIANGULAR RIB

  • Useful width: variable according to the number of steps
  • Maximum length: 6000 mm
  • Minimum pitch: 125 mm
  • Wave height: 55 mm

Key features:

  • Fire rating M0
  • 100% recyclable
  • Longevity
  • Lightweight (depending on metals)
  • Resistance in the environment aggressive
  • Flexible finishes
  • All metals possible
  • Adaptation of geometry

Profil:

  • Useful width: variable according to the number of pitches
  • Maximum length: 6000 mm
  • Minimum pitch: 125 mm
  • Wave height : 55 mm

Use:

  • The range of ribbed panels is a range of decorative facings made by micro-folding, usable for cladding facades, over-roofs or interior cladding.
  • This system is intended to be implemented on facades or designer cladding.
  • < /ul>

Perforations:

300+ possible perforations:

  • Round
  • Square
  • Elongated
  • Any surface
  • On the beach
  • Ribbed
  • Outremer Sensation

Anodizing:

  • Clear Anodizing
  • Gold
  • Bronze
  • Colouring
  • Class 15 or 20
  • Post anodized after parts are manufactured

Metal:

  • Aluminum
  • Galvanized Steel
  • Stainless Steel
  • Copper

Lacquering:

  • All RAL colors
  • Polyester and PVDF quality
  • Pre-coil coating
  • Post-coating by electrostatic powder coating
Data sheet: