Ribbed sheet Antigua


Product Information:

Image Project Info - 1
Image Project Info - 2


  • The characteristics of the bindings must comply with the recommendations of the professional rules SNFA. The fixings are placed at the bottom of the rib every 3 ribs maximum.
  • On wooden beams: Anchoring length 40 mm Pointed end self-tapping screw ø 6.3×50 mm minimum
  • On metal rails: Minimum thickness 15/10ths Self-tapping screw ø 6.3×35 mm minimum depending on the thickness of the drilling


On transverse wooden or metal rails including the spacing varies according to the characteristics of the product and the climatic loads. Support width on wooden rails: 60 mm, metal: 40 mm.
MOUNTING ACCESSORIES: see assembly sheet
SPAN TABLE: on request according to pitch


Useful width: According to the number of steps
Maximum length: 6000 mm
Minimum pitch: 75 mm
Wave height: 38 mm

Key features:

  • Fire rating M0
  • 100% recyclable
  • Longevity
  • Lightweight (depending on metals)
  • Resistance in aggressive environments
  • Flexibility of finishes
  • All metals possible
  • Adaptation of geometry


  • Useful width: variable according to the number of pitches
  • Maximum length: 6000 mm
  • Minimum pitch: 75 mm
  • Wave height : 38 mm


  • The range of ribbed panels is a range of decorative facings ratives produced by micro-folding, usable for cladding facades, over-roofs or interior cladding.
  • This system is intended to be implemented on facades or designer cladding.
  • < /ul>


More than 300 possible perforations:

  • Round
  • Square
  • Elongated
  • All surfaces
  • On the beach
  • Ribbed
  • Overseas
  • Sensation


  • Clear anodizing
  • Gold
  • Bronze
  • Colouring
  • Class 15 or 20
  • Pre anodized in coil
  • Post anodized after parts manufacturing


  • Aluminium
  • Galvanized Steel
  • Stainless Steel
  • Copper


  • All RAL colours
  • Polyester and PVDF quality
  • Pre-lacquering in coils
  • Post-lacquering by electrostatic powder coating
Data sheet: