Ribbed sheet Barbades


Product Information:

Image Project Info - 1
Image Project Info - 2


  • The characteristics of the bindings must comply with the recommendations of the professional rules the SNFAs. The fixings are placed at the bottom of the rib every 3 ribs maximum.
  • On wooden beams: Anchoring length 40 mm Pointed end self-tapping screw ø 6.3×50 mm minimum
  • On metal rails: Minimum thickness 15/10ths Self-tapping screw ø 6.3×35 mm minimum depending on the thickness of the drilling


On transverse wooden or metal rails the spacing of which varies according to the characteristics of the product and climatic overloads. Support width on wooden rails: 60 mm, metal: 40 mm.

MOUNTING ACCESSORIES: see assembly sheet

SPAN TABLE : on request according to the steps


  • Useful width: According to the number of steps
  • Maximum length: 3000 mm
  • Useful pitch: 85 mm
  • Wave height: 34.5 mm

Key features:

  • M0 fire rating
  • 100% recyclable
  • Longevity
  • Lightweight (depending on metals)
  • Resistance to aggressive environment
  • Flexibility of finishes
  • All metals possible
  • Adaptation of geometry


  • Useful width: variable according to the number of pitches
  • Maximum length: 3000 mm
  • Minimum pitch: 85 mm
  • Height of wave: 34.5 mm


  • The range of ribbed panels is a range of decorative facings produced by micro-folding, usable for cladding facades, over-roofs or interior cladding.
  • This system is intended to be implemented on facades or designer cladding.


More than 300 possible perforations:

  • Round
  • Square
  • Elongated
  • Any surface
  • On the beach
  • Ribbed
  • Ultramarine
  • Sensation


  • Clear anodizing
  • Gold
  • Bronze
  • Colouring
  • Class 15 or 20
  • Post anodized after parts are manufactured


  • Aluminium
  • Galvanized Steel
  • Stainless Steel
  • Copper


  • All RAL colors
  • Polyester and PVDF quality
  • Pre-lacquering in rolls
  • Post-lacquering by electrostatic powder coating
Data sheet: